vilified robberter


NEW paypal WebStore Launched!

Team Tiki is Proud to announce the launching of its long awaited web store.

Click ME!



Now offering the BotBitz line of brushed motor escs. Getting started in robotics has never been cheaper!

Rov Mk2 – testbed platform Rov technolgy

this is the Mk2 test platform

the Mk1 was slightly wider and used slightly differen drill motors. The Mk2’s components are:

18v HF drill motors
Vic 883 Escs
HK T6 radio
12v SLA battery 7ah
GoPro Hd Hero Camera
SuperCircuits 900mhz 500mw video tx
Set of tiki-RCW “really crappy wheels” -low traction compound
Tiki drill mounts
plywood deck – reused wood from pine box

more tests and vids to come.

The Consistent Winner

TeamTiki Is a little different. Unlike most robot combat teams we are not there to win. Our primary goal is to have fun and put on a good show. Because of this philiosphy TeamTiki doesn’t take home many medals. There has been one trend, our team artist Mike Nagamoto has taken a medal at every RoBoGames hes entered!

The art-bot display was quite killer this year, incorperating NagaMoto’s Mola Mola in coper, Elise’s Tiki Posters and a borrowed sheet of plexiglass.

here is the inscription that accompanied this year’s display:

Michael Yoji Nagamoto, metal sculptor, has transformed salvaged and new metals into sculpture pieces. Sculpture art that has a definite utilitarian twist also graces homes in the Bay Area and beyond. Inspiration comes from more than 35 years of diving off the California coast and Hawaiian Islands. A retired Fire Fighter of 30 years and now Welding Instructor at Laney College brings fire and water together to make “artsy fartsy” . Come to Laney College and take one of our Welding Courses. Learn the Principles and Practices of Welding and then go on to a career in welding or make your own “artsy fartsy” creations.

Mike “Artsy Fartsy” NagaMoto is avalable for commissioned pieces, decorative as well as utilitarian. contact site adminstrator for further details.

RoboGames 2011 Video pile

Triple-X fight 1:

Triple-X Fight 2:

Fight 2 – 2nd angle:

Internal Bot-CAM

MiniFridge Fight 1:

MiniFridge Fight 2:

MiniFridge Fight 3:


A Hoppy Easter

Still running hot from RoboGames… a perfect chance to spend money!

1: A pelouse 4040 digital scale. No more bathroom scale fudge factor for us.

2: An ebay mystery motor i’ve been looking at for a while. Mag power for $100? further tests are needed…

3: A GoPro Hd Hero camera.

I was taken back by the quality of this video:

and the Tv production company’s  frivolous use of Go-pros everywhere. 

In use it distorts the picture rather badly. However it has 2 features that make it a keeper. The time lapse photo mode and analouge video output. I can use the go-pro “gun camera” with a hobby city video transmitter and safetly relay bot testing video to the bunker.  All in all a nice piece of kit.

Here is a video shot with the GoPro:

TeamTiki Robot History

1996: Attended Robot Wars event. Started plans to build a robot the next day

Nov 2001:  BattleBots 4.0 Robot 60lb:  TikiFire  0-1

May 2002: Battlebots 5.0 Robot  60lb:  TikiFire 0-1

July 2003: Da Vinci Days Robot Competition WAR Robots 3lb: NTSC 12lb: High Gravity

Dec 2003: RSA Holiday Games Robot 12lb: High Gravity

Feb 2004: CSUS AntWeight Challange Robot 1lb: Terra Cotta Warrior

March 2004: RoboLympics 2004 Robots 3lb: NTSC  3Kg RC Sumo: Squishy

May 2004:  Gilroy Bot Gauntlet Robots 3lb: SandMan and NTSC

Aug 2004:  West Coast Robotics (WCR) Inaugural Robots60lb: DeLo 3lb: Sandman

Oct 2004: 2004 RFL Nationals Robot 3lb: Sandman 2nd place

March 2005: RoboGames 2005 Robots 30lb: Rover  3lb Sandman

June 2005:  WCR Spring Dance Robot 30lb: Splinterator

Nov 2005: 2005 RFL Nationals / Combots Cup 1 Robots 30lb: Splinterator

March 2006: Sony Games Developers Conference Robot 220lb: NTSC

June 2006: RoboGames 2006 Robot 12lb: Test Toaster .12

June 2007: RoboGames 2007 Robot 340lb: The Red Baron

June 2008: RoboGames 2008 Robot 60lb: The Brown Note 2nD place

June 2009: RoboGames 2009 Drank Dave’s Beer

April 2010: RoboGames 2010 Robot 120lb: Doomba

Oct 2010: ComBots Cup 5 Robots 120lb: Doomba 220lb: PineBox

April 2011: RoboGames 2011 Robots 60lb: Tripple-X , Michelin Pilot Sport Laney College Team Tiki Tire Bot 220lb: MiniFridge

The Big Show – RoboGames 2011

Bandsaw and Steel

So It begins. A new year and a new event quickly approaching. Around 3 months till RoboGames 2011.  We are committed to building a 60lb Lw Combat robot, a picture of the prototype;

prototype tire bot

Running gear: pair of Stature gear motors for drive, the electronics box borrowed from the Count, a Michelin tire as armor and a plywood mock frame. With a few hours invested in this test bed we were up and running around the shop. Its squirrely fast, I know it can be dialed back with the right radio. What i’m not sure of, the direct from China radio can be set up for an expo curve.  After consulting the Engrish laden manual it would appear that is not an option.  Maybe the robot can use the Futaba….

In addition to TireBot, which is Scott and Mike’s Bot, I have landed on a concept and theme for the artbot. Or one of the artbots, I would like to produce more than one. I would love to make at least one hockeybot… Ah too many robots not enough time or money.

More Cheap junk

I love ebay. I buy and I sell. I enjoy the real world Tetris game of packing stuff up for shipment. I found I can get professional looking results on packages with this heat sealer and some plastic bags. (Or those Air-bags lots of places use instead of packing peanuts)

Till one day it stopped working.

It had been a few years of off and on use, so i figured it was about time to switch to the included spare heating element. I broke out the meter and poked around but was unable to find something wrong. I removed the timer module, tested the pot and metered the relay, no problem…

After a good hour of head scratching and meter work I found the culprit;

 This little cheezy chunk of molded plastic! 

I clipped it clean off and soldered the wires directly to the mating pins. 

 Back in business! The sealer works better than before. I guess the connector was always a point of high resistance, leading to its failure.

The Count – Build

Cheap Motors need a home, time to build another showy non-competitive combat robot!

 The end result of Day 1.

Lets take a quick look to see how we got here

Step 1: A blueprint, a plan, a rough sketch, a vauge idea…   Somewhere exists a “not to scale” back of the napkin sketch of how The Count was suposed to go together. Everything looked like it would fit, wheels where the shoulders would go, lots of leg room for a big propane tank, it was perfect.  One of these days I’ll learn solid works… untill then


Plywood aided design!

The wood serves as ful scale blueprint, cutting fixture, welding jig, and maybe even a lid.

Here I simply lay the square steel tube over the template and use an angle grinder or hacksaw to miter the tubes.


All cut and test assembled


  And here you can see TeamMate Miles giving the frame a test fit.